Mk1, Mk2, Mk3 Specific Content

The Totally Triumph Network

Subject: "Soft top install" Locked thread - Read only
 
  Previous Topic | Next Topic
Printer-friendly copy     Email this topic to a friend    
Conferences Spitfire Hangar Mk1, Mk2, Mk3 Specific Topic #386
Reading Topic #386
Youngbobteam
Charter Member
353 posts (Keeps a clean machine)
Nov-26-10, 07:50 AM (PST)
Click to EMail Youngbob Click to send private message to Youngbob Click to view user profileClick to add this user to your buddy list  
"Soft top install"
 
I know this is a bit of a lame discussion, but what the heck.

One of the last things I need to fix on my Spit is the soft top (hood). All the pieces are in place, but I have a problem. I cannot get the stays to fit under the trim piece on the top of the wind screen. The gap is uneven end to end. I have tried to bend the piece, but I'm intimidated by it a little. I don't want to ruin the aluminum cap or damage the paint on the windshield frame. I am looking for any ones ideas on how to address the problem.

YB
65 MKII 1500/OD


  Printer-friendly page | Top

Conferences | Forums | Topics | Previous Topic | Next Topic

Powered by DCF2000 ©1997-2000 by DCScripts. All rights reserved.